1450VA 24V Pure Sine Wave UPS Inverter in Katanga 2024

1450VA 24V Pure Sine Wave UPS Inverter in Katanga 2024

Most appliances like CFL, fans, motor-based equipment like air conditioners and pump sets are designed to work on 50 Hz sine waves. Running such types of equipment on unregulated quasi sine wave-square wave-based inverters poses a risk as regards performance and durability.

To avoid such mishaps one must get a proper inverter for their appliances and keep them safe and in working condition throughout the year. Lento uses pure sine wave technology in their inverters, UPS and power supplies. The Sine wave inverters output stable frequency and voltage, mimicking mains power supply, making it perfectly suitable to power expensive equipment, especially inductive loads that do not work well on square waves.

Lento DSP sine wave Static UPS and inverters are designed to provide stable 50 Hz sine wave irrespective of load and battery voltage, making them the most suitable for inductive, capacitive and non-resistive loads. Importantly, Lento’s inverters and UPS are designed to deliver instantaneous high current during start-up, especially in the case of air conditioners and refrigerators, with safety cut out when battery voltage goes lower than a specified point to avoid brownouts and burning of motors.

Lento Single Phase 1450VA 24V Pure Sine Wave UPS, for Residential

Product Specification

Product Description

Lento's 1450VA Sine wave Home USP is developed with advanced technology to provide Pure Sine Wave output. Lento Inverters deliver best of the power supplies if compared with ordinary UPS and inverter systems. Our Domestic Series of Pure Sine Wave DSP Inverters has become very popular among a number of customers. Our domestic inverters and UPS systems are designed for providing an even flow of power output for different home appliances.

SALIENT FEATURES:

• DSP Based Design with absolute and stable Sine Wave output voltage and frequency.
• State of the art MOSFET based PWM technology with greater efficiency at lower cost with Dynamic Stability
• Over Temperature Protection
• More back-up being a Sine Wave UPS (ASIC Control)
• Selector Switch for High Charging and Low Charging
• Intelligent Charger for Deep Discharged Battery.
• Advance Battery Management for longer battery life and prevent battery from overcharging.

APPLICATIONS:

• Power Back -up for House hold as well as the computer
• Small Water pumps and all motor based small applications
• TV Sets, Fans, Tube Lights, etc.

Why Static UPS:
 

• The OFF Line UPS above 1.5KVA are highly unreliable and not available with any brand
• The ON Line UPS always wastes 10-15% electricity. i.e. Power Loss
• About 40% Loss due to poor power Factor is additional to the above.
• For the applications where the fully regulated Voltage and frequency is not required, the Static UPS is the best solution
• It provides the reliability of an ON Line UPS and with negligible power loss when Input Mains AC is present

Why Lento Static Ups is Better Than Other Inverters ?

The off Line UPS above 1.5KVA are highly unreliable and not available with any brand. The ON Line UPS always wastes 10-15% electricity. i.e. power Loss. About 40% Loss due to poor power Factor is additional to the above. for the applications where the fully regulated voltage and frequency is not required, the static UPS is the best solution. It provides of an Online UPS and with negligible power loss when input Mains AC is present.

What is an inverter?

An inverter converts DC voltage to alternating current voltage. In most cases, the input DC voltage is lower, while the output AC voltage is equal to the grid supply voltage, which can be 120 or 240 volts depending on the country.

The inverter can be designed as a standalone piece of equipment for applications such as solar power or as a backup power supply using batteries that are charged separately.

The other configuration is when it is part of a larger circuit, such as a power supply unit, also known as a UPS. In this case, the rectified mains AC in the PSU powers the inverter, while the rectified AC in the UPS powers it when there is power and the batteries power it when there is no power.

Inverters are classified according to the shape of the switching waveform. These have various circuit configurations, efficiencies, benefits, and drawbacks.

An inverter generates alternating current voltage from direct current power sources and is useful for powering electronics and electrical equipment rated at alternating current mains voltage. Furthermore, they are widely used in the inverting stages of switched mode power supplies. The circuits are classified based on their switching technology and switch type, as well as their waveform, frequency, and output waveform.

What is a Pure Sine Wave Inverter?

Before we get into the benefits of using pure sine wave inverters in your home, it's important to understand what they are and how they work. Pure sine wave inverters produce AC power that closely resembles the real thing - a steady, continuous sine wave with smooth, periodic oscillations. As a result, the price of this solar inverter for home is quite high. Furthermore, certain devices are only compatible with these inverters. If you use another type of inverter, your devices may malfunction or be damaged.

Advantages of Pure Sine Wave Inverter-

1. Consistent, smoother current flow

A pure sine wave inverter, as opposed to modified sine wave inverters, provides consistent, uninterrupted power to your devices. What makes this so great? Because modified sine wave inverters produce power in a step pattern, the voltage abruptly rises and falls, resulting in inconsistent current flow to your devices, which can be harmful in the long run. When shopping for a solar inverter for your home, it's best to go with pure sine wave inverters.

2. Produces same current as power grids

A pure sine wave produces a wave that is very similar to the smooth waveform generated by mains electricity. That is, there is no discernible difference between plugging your devices into these inverters and plugging them into a wall outlet.

This, of course, means that you can use almost any device during a power outage.

3. Devices are at low risk

The smooth waveform produced by a pure sine wave inverter also protects your high-end electronics from damage during power outages. After all, you don't want your gaming computer or oxygen machine to fail during a power outage.

Furthermore, using modified sine wave inverters with AC-powered devices such as microwaves and refrigerators can generate excessive waste heat, putting your devices at risk. Pure sine wave inverters, on the other hand, pose no threat to any of your devices.

4. Quiet Operation

When using standard inverters, you may occasionally hear an annoying humming sound from lights and fans. When using a pure wave inverter, this is not the case. The waves produced by these inverters make very little noise. Pure wave inverters are simply cleaner, cooler, and quieter.

5. Compatibility With a Variety of Devices

Because of the grid-like wave pattern and power these inverters produce, almost all devices work with them, including:

1. Appliances with AC motors, such as refrigerators, compressors or microwaves.
2. Audio equipment, video equipment, satellite systems, and microwave towers.
3. Other devices that use the same type of technology include bread makers, certain battery chargers, and light dimmers.
4. Many CPAP devices for sleep apnea and oxygen concentrators that require a power source.
5. Furthermore, there is no need to purchase a separate UPS for your computer because a pure wave inverter is more than capable of powering your PC.

So why use a pure sine wave inverter?

• The output waveform is a sine wave with very low harmonic distortion and clean power, similar to that provided by a utility—essential for your expensive equipment.
• Inductive loads, such as microwaves and motors, operate more quickly, quietly, and efficiently.
• Pure sine-wave technology reduces both audible and electrical noise in fans, fluorescent lights, audio amplifiers, televisions, fax machines, and answering machines. It prevents computer crashes, strange printouts, and monitor glitches.

Frequently Asked Questions-

1. What is a 1450VA 24V Pure Sine Wave UPS Inverter?

A 1450VA (volt-ampere) 24V (volts) Pure Sine Wave UPS (Uninterruptible Power Supply) inverter is a device that converts DC (direct current) power from a battery or other DC source into AC (alternating current) power with a pure sine wave output. It is commonly used to provide backup power to essential devices during electrical outages.

2. What is the significance of Pure Sine Wave?

Pure sine wave output is important because it replicates the type of power that comes from the grid, ensuring compatibility with sensitive electronics like computers, medical equipment, and appliances. It provides a smooth and clean waveform, reducing the risk of damage to connected devices.

3. What does 1450VA mean?

VA (volt-ampere) is a unit used to measure the apparent power in an electrical circuit. It's the product of the voltage (V) and current (A) in a circuit. In this case, 1450VA indicates the maximum load the inverter can handle.

4. What is the significance of 24V?

The 24V indicates the input voltage requirement of the inverter. It needs a DC input of 24 volts to operate.

5. What is the purpose of a UPS Inverter?

A UPS inverter acts as a backup power source in case of a mains power failure. It provides uninterrupted power to essential devices for a limited period, allowing them to shut down safely or continue functioning during outages.

6. How is the pricing determined?

The price of a UPS inverter can vary based on factors such as brand, capacity, features, build quality, and additional functionalities (like built-in charging, remote monitoring, etc.). Prices can also vary by region and local market conditions.

7. Where can I buy a 1450VA 24V Pure Sine Wave UPS Inverter in Katanga?

You can check local electronics stores, online marketplaces, or specialized retailers that deal with power backup solutions. Make sure to compare prices, features, and customer reviews before making a purchase.

8. What devices need sine wave UPS?

Typically, you'll need pure sine wave inverters for sensitive equipment, newer TV's, CFL light bulbs, and appliances with AC motors (microwaves and refrigerators).

9. What are the 4 components of UPS?

There are four main components in any online double conversion uninterruptible power supply (UPS) system: Rectifier; UPS Batteries; Inverter; and Static Bypass Switch.

10. Is pure sine wave UPS worth it?

A pure sine UPS is ideal for electric devices that need an extremely clean signal. You can run any appliance without having any issues. This is also ideal if you're a gamer and want to keep on playing through a storm. With a pure sine system, you won't have to worry about your picture getting fuzzy.

11. Does a refrigerator need a pure sine wave inverter?

Pure sine wave inverters, with high efficiency, stable sine wave output and high frequency technology, are suitable for all kinds of loads without harms, which can not only power any common electrical equipment (including phone, heater, etc.), but also run the sensitive electronics or appliances (like microwave, fridge.