10KVA 180V Pure Sine Wave Inverter Price in Sri Lanka
Inverters, like AC power supplies, use DC electrical energy stored in a battery or battery bank. They use electronics and transformers to convert DC to AC and then increase the voltage to 220V. Even when compared to generators, inverters are extremely efficient because they only consume DC power in proportion to the amount of AC power they produce.
With sufficient solar panels, an inverter system can easily replace any power source. The long-term benefits of such an investment are self-evident.Lento uses pure sine wave technology in their inverters, UPS and power supplies. The Sine wave inverters output stable frequency and voltage, mimicking mains power supply, making it perfectly suitable to power expensive equipment, especially inductive loads that do not work well on square waves.
Lento DSP sine wave Static UPS and inverters are designed to provide stable 50 Hz sine wave irrespective of load and battery voltage, making them the most suitable for inductive, capacitive and non-resistive loads. Importantly, Lento’s inverters and UPS are designed to deliver instantaneous high current during start-up, especially in the case of air conditioners and refrigerators, with safety cut out when battery voltage goes lower than a specified point to avoid brownouts and burning of motors.
Lento 10KVA180VPure Sine Wave Inverter
Product Specification
Capacity |
10 KVA |
Output Voltage |
220-230 V |
Output Frequency |
50 Hz |
Full Load Output Current |
49A +/- 2A |
Audible Noise |
<25 dB |
Efficiency |
75 to 90 % |
Power Factor |
0.8 |
Change Over Time (Mains to Inverter) |
<10 Sec |
Total Harmonic Distortion |
3 % for Linear Load ,5 % for Non-Linear Load |
Wave Form |
Pure Sine Wave |
Product Description
The Basic Purpose of the Industrial UPS systems is to protect critical, costly and sensitive equipment from the electrical disturbances that will otherwise jeopardize their operation or affect their performance. Mains-Line failures, Blackouts, High & Low Voltage fluctuations, Lightning, Electrostatic discharge and rapid over voltages are phenomena found in all environments, causing damage to hardware and loss of data. When the mains supply is present. The inverter section derives its power from the mains, rectifies it and the back-up batteries are kept in a constantly charged state. When the mains supply fails, the source of DC Power for the inverter section shifts to the Battery without any break whatsoever in the output.Lento Industrial UPS should be your source of choice for 'Pure' and 'Sure' power for all mission critical requirements
Salient Features of 10KVA 192V DSP Pure Sine Wave Static UPS
Applications:
What is a Pure Sine Wave Inverter?
Before we get into the benefits of using pure sine wave inverters in your home, it's important to understand what they are and how they work. Pure sine wave inverters produce AC power that closely resembles the real thing - a steady, continuous sine wave with smooth, periodic oscillations. As a result, the price of this solar inverter for home is quite high. Furthermore, certain devices are only compatible with these inverters. If you use another type of inverter, your devices may malfunction or be damaged.
Benefits of an Inverter-
Why Static UPS:
Why Lento Static Ups is Better Than Other Inverters?
The off Line UPS above 1.5KVA are highly unreliable and not available with any brand. The ON Line UPS always wastes 10-15% electricity. i.e. power Loss. About 40% Loss due to poor power Factor is additional to the above. for the applications where the fully regulated voltage and frequency is not required, the static UPS is the best solution. It provides of an Online UPS and with negligible power loss when input Mains AC is present.
So why use a pure sine wave inverter?
Frequently Asked Questions-
Q. Is an inverter better than a generator?
Although inverter generators can't produce as much power as conventional generators, they are more efficient due to how the energy how the AC current is produced.
Q. How do I turn off my inverter when not in use?
To turn off the inverter first, choose the bypass option using the bypass switch located on the back of the inverter. Then, on the front side of the inverter, you will find the on/off button, press and hold that button until the inverter is switched off.
Q. Which inverter is most efficient?
Lento : Overall excellent
Q. What size inverter is needed to run a house?
Ideally, inverters between 756-1000 W are best suited for homes. There are several other types of inverters based on capacity as well.
Q. How many years do inverter batteries last?
The average inverter battery lifespan of a tubular battery is 7-8 years as compared to just 3-4 years of a flat grid battery. Always keep in mind that the longer any battery is exposed to heat, the lesser its efficiency.
Q. What is DSP SineWave?
Description. sine = dsp. SineWave creates a sine wave object that generates a real-valued sinusoid with an amplitude of 1, a frequency of 100 Hz, and a phase offset of 0. By default, the sine wave object generates only one sample.
Q. Is online UPS pure sine wave?
On-line UPS power supply bypass output is pure sine wave: In normal mode (A) : the output of municipal electricity after passing through the inverter is an impure sine wave; Battery mode (B) : the output of impure sine wave after the dc voltage passes through the inverter.
Q. What is meaning of DSP inverter?
Digital signal processors (DSP) based controllers provide the high level of computational performance and programming flexibility needed for the real-time signal processing in solar power inverters.
Q. How do you know if a sine wave is UPS?
Use an Oscilloscope and look for wave pattern if it gives sine or cosine waveform then the inverter is pure sine wave.